Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
- Ryadny six-cylinder engine
   General information
   The repair procedures, which performance it is possible without engine extraction from the car
   Reduction in the provision VMT of a step of compression of the piston of the first cylinder
   Removal and installation of a cover of a head of cylinders
   Removal, check of a condition and installation of yokes and bars of pushers
   Replacement of klapanny springs, their plates and maslootrazhatelny caps
   Removal and installation of the inlet pipeline / final collector
   Removal and installation of a head of cylinders
   Replacement of a forward epiploon of a cranked shaft
   Condition check, removal and installation of a cover of a distributive chain, chain and its asterisks
   Removal, check of a condition and installation of a camshaft, bearings and hydraulic pushers
   Removal and installation of the pallet of a case
   Removal, check of a condition and installation of the oil pump
   Removal and flywheel installation / driving disk
   Replacement of a back epiploon of the crankshaft
   Check of a condition and replacement of rubber pillows of support of the engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
rem0ntik.ru



General information

This Head is devoted to the description of procedures of repair of the ryadny 6-cylinder engine in volume of 4.0 l which performance is possible without extraction of last of the car. All information concerning procedures of removal and installation of the engine, and also major maintenance of the block and a head of cylinders can be found in Head of Procedure of the general and major maintenance of the engine.

The description offered below repair procedures is made on the basis of the assumption that the engine remains established on the car. If the engine is removed and transferred on the assembly stand, many from recommended below steps will appear inapplicable.

The specifications provided in the beginning of this Chapter belong only to the procedures described here. Requirements to performance of procedures of repair and restoration of the block and a head of cylinders are stated by Spetsifikatsionnye at the beginning to Head of Procedure of the general and major maintenance of the engine.