Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
- Ryadny six-cylinder engine
   General information
   The repair procedures, which performance it is possible without engine extraction from the car
   Reduction in the provision VMT of a step of compression of the piston of the first cylinder
   Removal and installation of a cover of a head of cylinders
   Removal, check of a condition and installation of yokes and bars of pushers
   Replacement of klapanny springs, their plates and maslootrazhatelny caps
   Removal and installation of the inlet pipeline / final collector
   Removal and installation of a head of cylinders
   Replacement of a forward epiploon of a cranked shaft
   Condition check, removal and installation of a cover of a distributive chain, chain and its asterisks
   Removal, check of a condition and installation of a camshaft, bearings and hydraulic pushers
   Removal and installation of the pallet of a case
   Removal, check of a condition and installation of the oil pump
   Removal and flywheel installation / driving disk
   Replacement of a back epiploon of the crankshaft
   Check of a condition and replacement of rubber pillows of support of the engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
8-499-391-38-82 .



The repair procedures, which performance it is possible without engine extraction from the car

Set from procedures of the general repair of the engine can be made without its extraction from an impellent compartment of the car.

Before starting to work make cleaning of an impellent compartment and external surfaces of the engine any of pressure head methods. It will essentially simplify performance of the majority of procedures and will allow to reduce risk of hit of dirt and extraneous subjects in the engine.

Depending on nature of the forthcoming work for simplification of access to the corresponding components cowl removal (Head the Body) can be demanded. In order to avoid injury of wings of the car cover them (special covers are issued, however not worse simply old blankets will be suitable for this purpose also).

In case of existence of leakages of the vacuum, the fulfilled gases, oil or a cooler, indicating need of replacement of laying or epiploons, repair it can be usually made on the engine left on the car. Access to laying of the inlet pipeline, a final collector, a cover of a drive of the gas-distributing mechanism, the pallet of a case and a head of cylinders, and also to epiploons of a cranked shaft is also possible without removal of the engine from the car.

External components of the engine, such as the inlet pipeline with a final collector, the case pallet (and the oil pump), the water pump, a starter, the generator, the distributor and components of a power supply system can be removed for repair from the engine established on the car.

Since the head of cylinders can be removed without removal of the engine from the car, service of the klapanny mechanism also does not demand engine extraction. The same concerns procedures of replacement of a camshaft, a distributive chain and its asterisks.

In extreme cases, in the absence of the necessary equipment, without engine extraction from the car can be made as well repair and replacement of pistons, piston rings, rods and shatunny bearings. However, such practice is the extremely undesirable in view of need of carrying out a large number of preparatory procedures and careful cleaning of all components.