Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
- V8 engine
   General information
   The repair procedures, which performance does not demand engine extraction from the car
   Reduction in position VMT of the piston of the first cylinder
   Removal and installation of covers of heads of cylinders
   Removal, check of a condition and installation of yokes and bars of pushers
   Replacement of klapanny springs, their plates and maslootrazhatelny caps
   Removal and installation of the inlet pipeline
   Removal and installation of final collectors
   Removal and installation of heads of cylinders
   Replacement of a forward epiploon of a cranked shaft
   Removal, check of a condition and installation of a cover of the distributive chain, chain and its asterisks
   Removal, check of a condition and installation of a camshaft and hydraulic pushers
   Removal and installation of the pallet of a case
   Removal, check of a condition and installation of the oil pump
   Removal and flywheel installation / driving disk
   Replacement of a back radical epiploon
   Check of a condition and replacement of rubber pillows of support of the engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions



General information

This Head is devoted to procedures of repair and service of the V8 engines, not demanding extraction of that of the car. All information concerning removal and installation of the engine, and also major maintenance of the block and heads of cylinders can be found in Head of Procedure of the general and major maintenance of the engine.

The description given in the text of this Part of Head of procedures is made on the basis of the assumption that the engine does not act in film from the car. In case the engine is taken and established on the dismantling stand for carrying out the complete major maintenance, many of intermediate steps of descriptions will appear are inapplicable.

The specifications provided in the beginning of this Part of Head concern only the procedures described here. The technical requirements concerning performance of procedures of repair and restoration of the block and heads of cylinders are given in Head of Procedure of the general and major maintenance of the engine.

Engines to which this Head is devoted represent V8 engines, with the top arrangement of the klapanny mechanism (OHV), volume of 5211 cm3 (5.2 l), equipped with hydraulic pushers of roller type and electronic system of injection of fuel.