Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
- Brake system
General information
System of anti-blocking of brakes (ABS) - the general information
Replacement of blocks of disk brake mechanisms
Removal, major maintenance and installation of a support of the disk brake mechanism
Condition check, removal and installation of a brake disk
Replacement of boots of drum-type brake mechanisms
Removal, major maintenance and installation of wheel cylinders
Removal and installation of the combined valve (regulator)
Removal and installation of the main brake cylinder
Check of a condition and replacement of brake hoses and lines
Pumping of brake system
Functioning check, removal and installation of the vacuum amplifier of brakes
Functioning check, removal, installation and adjustment of the sensor switch of stoplights
Adjustment of the parking brake
Replacement of cables of a drive of the parking brake
Replacement of boots of the parking brake (disk brake mechanisms of back wheels)
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
|
Brake system
Specifications
General parameters
Disk brake mechanisms
| Minimum admissible thickness of a brake disk |
It is beaten out or cast on a disk body
|
| The most admissible fluctuations of thickness of a disk (mm)
|
- Disk of the forward brake mechanism
|
No more than 0,013 mm
|
- Disk of the back brake mechanism
|
No more than 0,025 mm
|
| The most admissible palpation of a disk (mm) |
0,13
|
| Minimum admissible thickness of brake shoes |
|
Drum-type brake mechanisms
| The most admissible diameter of a drum |
It is beaten out or cast on a drum body
|
| Minimum admissible thickness of frictional overlays of brake boots |
|
Efforts of a tightening of carving connections, N • m
| Nuts of fastening of the vacuum amplifier of brakes |
41
|
| Nuts of fastening of the main brake cylinder
|
13,0 — 24,9
|
|
Fixing pins of supports of brake mechanisms (forward and back)
|
9,5 — 20,3
|
|
Hollow bolt of fastening of a brake hose to a support of the brake mechanism (lobbies and back brake mechanisms)
|
31
|
| Bolts of fastening of wheel cylinders |
10,2
|
|
|
