- Weaken nuts of fastening of a wheel, поддомкратьте the car and establish it on props. Cock the parking brake and remove a wheel.
- Give to a hook of the top rod of the shock-absorber. For rod keeping from a provorachivaniye use a rozhkovy key. If the nut "became attached", impregnate it previously with getting oil. Probably, for keeping a rod it is necessary to use самоконтрящимися nippers as for a usual key лыски on it are quite small.
|
|
- At an otdavaniye of a nut of a rod of the shock-absorber (shooter) for rod keeping from a provorachivaniye it is necessary to use a rozhkovy key or самоконтрящимися nippers.
|
- Give bolts and nuts of fastening of the bottom support of the shock-absorber, then take the last through a wheel arch. Remove from the top part of the shock-absorber of a washer and rubber plugs through passage.
|
|
- The bottom end of the shock-absorber fastens to a case of the forward bridge by means of two bolts (arrow) with nuts (in a picture are not visible).
|
|
|