- Disconnect a negative wire from the battery.
- Remove the central facing of a combination of devices (The section Removal and installation of facings of a control panel).
- Give two screws behind the top part of the central facing which serve for dashboard fastening.
- Having hooked, take a nozzle lattice обдува a windscreen, disconnect any available sensors and put a lattice aside.
- Give four screws in a sleeve обдува glasses which serve for dashboard fastening.
|
|
- Give sleeve screws обдува a windscreen (arrow).
|
- Open a ware box, give two screws of fastening of the dashboard, then pull the panel up, liberating it from clamps along the edges.
- Give three screws of fastening of facing of a combination of devices to the dashboard, remove facing.
|
|
- Give screws of fastening of facing of a combination to (arrow) dashboard.
|
-
Installation make upside-down.
|
|