Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- System of onboard electric equipment
   General information
   Diagnostics of malfunctions of electric equipment of the chassis - the general information
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers (thermal relays) - the general information
   The relay - the general information
   Check of a condition and replacement of the breaker of indexes of turn / alarm system
   Check of serviceability of functioning and replacement of the universal podrulevy switch
   Check of a condition and replacement of the switch of the ignition/cylinder of the lock
   Check of serviceability of functioning of the switch of heating of glass of a door of a back
   Check of a condition and repair of a heater of glass of a door of a back
   Replacement of lamps of head headlights
   Adjustment of provision of head block headlights
   Removal and installation of cases of head block headlights
   Replacement of lamps
   Removal and installation of switches of head headlights and screen wiper of a window of a door of a back
   Removal and installation of a radio tape recorder and loudspeakers
   Removal and aerial installation
   Check of functioning and replacement of the motor of screen wipers
   Removal and installation of a combination of devices
   Check of functioning and horn replacement
   Description of a principle of functioning and diagnostics of a control system by speed (темпостата)
   Description of a principle of action and diagnostics of the electric drive of lowering-podnimaniya of glasses
   Principle of functioning and check of the central lock and system of opening of doors without a key
   Principle of action and check of serviceability of the electric drive of change of provision of seats
   Principle of action and check of serviceability of the electric drive of mirrors back look
   Safety cushion - the general information
   Electric circuits - the general information
   Arrangement and purpose of the relay and safety locks
+ Governing bodies and operation receptions


Replacement of lamps

Forward indexes of turn / marker lights

 PERFORMANCE ORDER

  1. Give fixing screws, remove the case of the index of turn, turn a cartridge counter-clockwise and take from it a lamp.

Details of installation of a lamp of the index of turn.

  1. Give screws and remove the case of a marker light, having provided access to a lamp.

Details of installation of a lamp of a marker light.

  1. Installation make upside-down.

Back dimensional fires/stoplights/indexes of turn

 PERFORMANCE ORDER

  1. Give bolts and remove a casing of a back marker light.
  1. Give bolts and remove the case of a back marker light, having pulled it strictly back.
  1. Turn a cartridge of a lamp counter-clockwise and take it from a back part of the case. Press inside and turn counter-clockwise lamps of the index of turn, a stoplight and a back marker light for their extraction from the cartridges.
  1. Turn a cartridge of a lamp and take it from lamp assembly - press a lamp inside and, having turned, take from the boss.
  1. Installation make upside-down.

Stoplights of the top level

 PERFORMANCE ORDER

  1. Open a back door. Give the screw and, having hooked, uncover cases. Take a cartridge and replace a lamp, having pulled it for removal strictly vertically. On models of the last years of release uncover, give two bolts and take the case, having overturned it, then turn a cartridge counter-clockwise, remove it and take a lamp, having pulled it strictly vertically.
  1. Remove a cartridge, then grasp a lamp and pull it from the boss in strictly vertical direction.
  1. Installation make upside-down.

Illumination of a combination of devices

 PERFORMANCE ORDER

  1. For ensuring access to lamps of illumination of a combination of devices it is necessary to remove before a combination (see. Section Check of serviceability of functioning of the switch of heating of glass of a door of a back). Then lamps can be removed from a back wall of a combination and are replaced.
  2. For extraction of a lamp turn it counter-clockwise.
  3. Installation make upside-down.

Illumination of registration plate

 PERFORMANCE ORDER

  1. Give screws and remove an arm of a plate of registration plate, then take lamps from the boss under an arm.

Details of installation of a lamp of illumination of registration plate.

  1. Installation make upside-down.

Internal lighting devices

 PERFORMANCE ORDER

  1. Having hooked, take a plafond from the lamp case.
  2. Disconnect a lamp from plugs. Probably it is necessary to hook a lamp the lever - thus rest the last only against lamp regions not to damage flask glass.

Details of installation of a lamp of illumination of a luggage compartment.

Details of installation of a lamp of illumination of salon.
  1. Installation make upside-down.