Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
- Governing bodies and operation receptions
   Acquaintance to the car
   Start of the engine and driving
   Dashboard and salon equipment
   Trailer towage
   Emergency towage of the car
   Car towage for the purpose of engine start


Car towage for the purpose of engine start

All-wheel drive models

In order to avoid losses of oil do not disconnect the back driveshaft from a transfer case.


 PERFORMANCE ORDER

  1. Switch transmission to a neutral.
  2. Transfer a control lever a transfer case to neutral situation (a control lamp of an all-wheel drive mode and illumination of four wheels on an outline drawing of the car on the screen of the graphic display should go out.
  3. Include a transfer case on transfer, AT - in situation D and make sure that the car cannot move out from a place.
  4. For shutdown of blocking of a steering column turn the ignition key in the situation OFF.
  5. Transfer AT to situation P.
  6. Connect the car a rigid hitch to a towing vehicle.

At all do not cling a towing beam for a car bumper!

2WD models

The back driveshaft during towage should be disconnected from transmission - the opening in a case in order to avoid losses of oil should be muffled a stopper. Translate the lever of the selector of transfers to R.Prezhde chem's position to begin independent movement do not forget to connect into place the driveshaft and to check level of transmission oil.