Jeep Grandee Cheroki + Jeep Grand Cherokee brand Cars - Settings and routine maintenance - Schedule of routine maintenance of Jeep Cherokee Introduction General information on settings Checks of levels of liquids (each 400 km (250 miles) run or weekly) Check of a condition of tires and pressure in them (each 400 km (250 miles) run or weekly) Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly) Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) run or times in 3 months) Change of impellent oil and the oil filter (each 4800 km (3000 miles) run or times in 3 months) Check and battery service (each 4800 km (3000 miles) run or times in 3 months) Check of serviceability of system of cooling (each 4800 km (3000 miles) run or times in 3 months) Check of a condition and replacement of hoses passing under a cowl (each 4800 km (3000 miles) run or times in 3 months) Check of a condition and replacement of brushes of screen wipers (each 4800 km (3000 miles) run or times in 3 months) Check of a condition of a suspension bracket and steering Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) run, or times in 6 months) Check of level of transmission oil of a manual transmission (RKPP) (each 12 000 km (7500 miles) run, or times in 6 months) Check of level of oil of a transfer case of all-wheel drive (4WD) of models (each 12 000 km (7500 miles) run, or times in 6 months) Check of level of oil of differential (each 12 000 km (7500 miles) run, or times in 6 months) Rotation of wheels (each 12 000 km (7500 miles) run, or times in 6 months) Check of a condition of brake mechanisms (each 12 000 km (7500 miles) run, or times in 6 months) Check of a condition of components of a power supply system (each 12 000 km (7500 miles) run, or times in 6 months) Condition check, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) run, or times in 6 months) Check of a condition of seat belts (each 12 000 km (7500 miles) run, or times in 6 months) Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) run, or times in 6 months) Chassis greasing (each 12 000 km (7500 miles) run, or times in 6 months) Replacement of the air filter (each 48 000 km (30 000 miles) run, or times in two years) Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) run, or times in two years) Adjustment of tapes of automatic transmission (AT) (model since 1994 вып.) (each 48 000 km (30 000 miles) run, or times in two years) Replacement of transmission oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) run, or times in two years) Change of oil of a transfer case (4WD model) (each 48 000 km (30 000 miles) run, or times in two years) Change of oil of differential (each 48 000 km (30 000 miles) run, or times in two years) Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km (30 000 miles) run, or times in two years) Check of a condition and replacement of the valve of system of operated ventilation of a case (PCV) (V8) engines (each 48 000 km (30 000 miles) run, or times in two years) Check, pro-cleaning and replacement of a hose of system of continuous ventilation of a case (CCV) (6 cylinder engines) (each 48 000 km (30 000 miles) run, or times in two years) Check of serviceability of functioning of system of catching паров fuels (each 48 000 km (30 000 miles) run, or times in two years) Cleaning of the filter of ventilation of a case (V8) engines (each 48 000 km (30 000 miles) run, or times in two years) Replacement of the fuel filter (each 48 000 km (30 000 miles) run, or times in two years) Replacement of spark plugs (each 48 000 km (30 000 miles) run, or times in two years) Check of a condition of candle wires, covers and a distributor begunka (each 48 000 km (30 000 miles) run, or times in two years) + Ryadny six-cylinder engine + V8 Engine + Procedures of the general and major maintenance of the engine + Systems of cooling, heating and air conditioning + the Power supply system and production of the fulfilled gases + System of electric equipment of the engine + Systems of decrease in toxicity of the fulfilled gases and engine management + Manual box of gear shifting + Automatic transmission + Transfer case + Coupling and transmission line + Brake system + Suspension bracket and steering + Body + System of onboard electric equipment + Governing bodies and operation receptions
|
Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) run, or times in two years)
Plums and replacement of the AT transmission liquid should be made according to the schedule of routine maintenance of the car. As transmission liquid remains more hotly still for a long time after engine switching off, procedure should be made only after complete cooling of the power unit. On models since 1994 вып. Manufacturers recommend to make also at this stage adjustment of tapes of transmission (The section Adjustment of tapes of automatic transmission (AT) (model since 1994 вып.) (each 48 000 km (30 000 miles) run, or times in two years)) as this procedure demands removal of the pallet of a case of transmission.
Before the beginning of work get necessary amount of transmission liquid of a demanded grade (see. The section Recommended greasings and liquids at the beginning of this Chapter) and the new filter.
The number of the other tools necessary for performance of this procedure, includes jacks for a car pripodnimaniye over the earth, drain capacity sufficient for reception of at least 4.6 l of liquid of volume, a stock of old newspapers and enough of pure rags.
|
- To Poddomkratta the car also establish it on props.
- Having established drain capacity under transmission, give back and lateral bolts of fastening of the pallet of a case of transmission. Forward bolts only weaken approximately on 4 turns.
- Carefully hook the pallet a screw-driver, having given the chance to liquid to flow down in capacity
|
- Without removing completely, but having weakened forward bolts of the pallet of a case of transmission, carefully delay a back part of the pallet down, providing liquids effluence possibility in drain capacity.
|
- Remove the remained bolts, the pallet and laying. Smooth out an interfaced surface of a case of transmission, having carefully removed with not all traces of a material of old laying and hermetic.
- Merge the liquid which has remained in the pallet, wash out the pallet solvent and dry it, having whenever possible used for this purpose compressed air.
- Give screws of fastening of the filter from the case of the valve and remove the filter.
|
- Give bolts of fastening of the filter - the special natural is required by a TORX type head.
|
- After the filter is removed it will be possible to try to estimate a transmission condition, having attentively examined a bottom the pallet of its case, the filter and the merged liquid. During use transmission liquid can replace the color with bright red on dark red and even the brown. If the merged liquid has very dark color and smells as ashes, it is possible to consider it as a sign of an overheat of transmission. Detection at the bottom of the pallet or in the filter of small metal particles speaks about possible damages of internal components. In case of absence of confidence of definition of a condition of transmission on above-mentioned signs, it is necessary to deliver the car in dealer office or a car-care center workshop for more detailed inspection.
- Prokladochnym a scraper scratch out all traces of a material of old laying from the valve case.
|
Observe extreme care - try not to damage a prokladochny surface of the case of the valve. Establish the new filter and laying. |
- Make sure of absolute purity of a prokladochny surface of the pallet of a case of transmission, then establish on the pallet a magnet (if it is provided) and new laying. Put the pallet to a case of transmission and, moving on perimeter, gradually for each approach tighten fixing bolts with demanded effort.
|
- Put new laying to a flange of the pallet of a case of transmission and insert for its fixing fixing bolts.
|
- Lower the car on the earth and add in transmission through a jellied tube (The section Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly)) necessary quantity (about 3 l) liquids of a demanded grade.
- At the transmission established in the situation "R" and the cocked parking brake start the engine on turns of fast idling, but do not increase speed.
- Carry out the selector lever consistently through all provisions, having returned it back to the situation "R". Check once again level of transmission liquid, in case of need make having added.
- After a transmission warming up again check level of transmission liquid (The section Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly)). During the first several trips look under the car, checking, whether there are no leakages of liquid.
|
|
|
|