Jeep Grand Cherokee

1993-1999 of release

Repair and car operation

Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
- V8 engine
   General information
   The repair procedures, which performance does not demand engine extraction from the car
   Reduction in position VMT of the piston of the first cylinder
   Removal and installation of covers of heads of cylinders
   Removal, check of a condition and installation of yokes and bars of pushers
   Replacement of klapanny springs, their plates and maslootrazhatelny caps
   Removal and installation of the inlet pipeline
   Removal and installation of final collectors
   Removal and installation of heads of cylinders
   Replacement of a forward epiploon of a cranked shaft
   Removal, check of a condition and installation of a cover of the distributive chain, chain and its asterisks
   Removal, check of a condition and installation of a camshaft and hydraulic pushers
   Removal and installation of the pallet of a case
   Removal, check of a condition and installation of the oil pump
   Removal and flywheel installation / driving disk
   Replacement of a back radical epiploon
   Check of a condition and replacement of rubber pillows of support of the engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions

The repair procedures, which performance does not demand engine extraction from the car

Many of procedures of the general repair of the engine can be executed without removal of the last from the car.

Before starting the main work make cleaning of an impellent compartment and external surfaces of the engine. Cleaning should be careful, with application of a pressure or pair. It will help to facilitate considerably the forthcoming work and to prevent hit in internal cavities and galleries of the engine of dirt.

Depending on nature of the forthcoming work removal of a cowl of the car (Head the Body) for ensuring access to the corresponding components can be demanded.

If existence of leakages of oil, a cooler, the fulfilled gases or loss of depression demands carrying out replacement of laying or epiploons, these procedures can be completely executed without engine removal. Access to laying of the inlet pipeline, a final collector, the pallet of a case, heads of cylinders, covers of a distributive chain and to epiploons of a cranked shaft is quite possible without engine extraction from the car.

Removal and repair of components established outside on the engine, such as the inlet pipeline and a final collector, the water pump, a starter, the generator, the distributor and the carburetor (power supply system components) also does not demand removal of the engine from the car.

As heads of cylinders can be removed without engine extraction, service of components of the klapanny mechanism also gets to number of procedures considered in this Chapter.

Engine removal also do not demand procedure condition check, repair and replacements of a distributive chain with asterisks and the oil pump.

In extreme situations, in the conditions of a severe shortage of the necessary equipment, without engine extraction from the car procedures of replacement of piston rings, pistons, rods and shatunny bearings can be made. However, to practise such repair does not follow in a type of need of carrying out weight of a preparatory work and careful observance of purity.